 |
 |
 |
 |
 |
Every EXCOR® blood pump consists of a
transparent polyurethane housing that is divided into one air chamber
and one blood chamber by a three-layer membrane. Graphite between the
membranes helps to minimize friction. The membrane on the blood side
merges without a seam into the surface of the housing. A specially
produced CARMEDA® coating
is plated on the slick, flow-optimised blood contact surface. In- and
outflow sockets, which are made of polyurethane and bear titan
connectors for the connection of the cannulas, lead from the blood
chamber to the in or outlet cannulas. On the air side of the membrane
lays the connection for the pneumatic driving tube. The de-airing is
effected through the de-airing socket.
The selection of the pump size could be made by this configurator.
Pump valves: tilting-disc or polyurethane?
Mechanical
valves in the sockets ensure an adjusted blood flow. The blood pumps
are available with two different types of valves:
- Tilting disc – approved and reliable for long-term applications
- Polyurethane valve. Operates soundless
Selection of Blood Pumps
| Blood Pump with PU Valve | ||
| FE-P50P-001 | Blood Pump with PU Valve 50ml in/out Ø 12mm | |
| FE-P60P-001 | Blood Pump with PU Valve 60ml in/out Ø 12mm | |
| FE-P80P-001 | Blood Pump with PU Valve 80ml in/out Ø 12mm | |
| Blood Pump with Tilting Disc | ||
| FE-P50M-001 | Blood Pump with Tilting Disc 50ml in/out Ø 12mm | |
| FE-P60M-001 |
Blood Pump with Tilting Disc | |
| FE-P80M-001 | Blood Pump with Tilting Disc 80ml in/out Ø 12mm | |
| FE-P80M-003 | Blood Pump with Tilting Disc 80ml in/out Ø 16mm | |
| FE-P80M-004 | Blood Pump with Tilting Disc 80ml out/in Ø 16mm | |
